【✨LG X Sonos 家居視聽期間限定館✨】MegaBox旗艦店展示多款LG電視同埋Sonos影音產品,全部都有會場優惠價!👉即睇詳情
Gaggenau VR414111 38厘米 嵌入式燒烤爐
Gaggenau VR414111

Gaggenau VR414111 38厘米 嵌入式燒烤爐

代理出貨

行貨保證

免基本運費

可賺 $148

已售出 >20 件
$37,000 一按即再減
【🧧龍年大利是】購買此產品輸入優惠碼「Dragon888」即照價再減$888,優惠期至2024年2月29日!
👉即刻睇其他優惠產品

*優惠產品將不定期更新,優惠有效期以落單付款時間為準,如產品於報價後或加入購物車後取消此優惠,恕不能追回優惠價,敬請客人把握時間落單,謝謝。

Pro Care 總代理原廠星級延長保養(服務詳情):
全城最抵!買煮食爐/焗爐換購抽油煙機(產品詳情):
必換優惠 (包送貨):
因近期安裝排期十分緊湊,安裝日期根據安裝師傅約客為準,我們會盡可能安排送貨及安裝服務於同日進行,但安裝服務有可能視情況而安排於其他日子進行。
如客人選擇的產品需要睇位服務,睇位報告結果需要大約 3 個工作天,屆時我司會再約送貨/安裝日子。
現在下單,最快會於 2024-03-01 取貨或送貨
【🧧龍年大利是】購買此產品輸入優惠碼「Dragon888」即照價再減$888,優惠期至2024年2月29日!
👉即刻睇其他優惠產品

*優惠產品將不定期更新,優惠有效期以落單付款時間為準,如產品於報價後或加入購物車後取消此優惠,恕不能追回優惠價,敬請客人把握時間落單,謝謝。

北角陳列室
香港北角渣華道 52-60A號地下G-H舖
代理現貨可即送
元朗陳列室
新界元朗朗日路8號形點II 3樓 A331號舖
代理現貨可即送
沙田陳列室
新界沙田鄉事會路138號HOMESQUARE 3樓355號舖
代理現貨可即送
九龍灣旗艦店
九龍灣宏照道38號企業廣場五期MegaBox 6樓3號舖
代理現貨可即送
旺角廣東道陳列室
旺角廣東道847-865號4號舖
代理現貨可即送
旺角上海街陳列室
香港九龍旺角 上海街408號地下
代理現貨可即送
觀塘換領中心
觀塘海濱道133號MG Tower萬兆豐中心21樓C-E室(牛頭角B6 出口)
代理現貨可即送
北角廚房概念店
香港北角渣華道29號地下
代理現貨可即送
倉庫
代理現貨可即送

Gaggenau VR414111 產品介紹

保養期:1 年

 Handling
Control knobs with illuminated ring, cooking zone and output level markings.
Electronic control in 12 output levels.
 Features
Cooktop, lava stone trough and grease collecting insert from stainless steel.
Two zones, each 1500 W, can be operated together as a complete surface or each halve separately.
Two-part cast grill.
 Safety
Safety shut-off.
Pre-heat and residual heat indicator.
 Planning notes
Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary.
If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
Additional instructions for flush installation:
Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
A minimum lateral clearance of at least 100 mm from adjacent heat-sensitive furniture or from the wall must be observed.
Appliance can be snapped into the worktop from above.
Appliance weight: approx. 26.
 Connection
Total connected load 3.0 KW.
Connecting cable 1.5 m without plug.

1