Gaggenau VL414110 Vario 400系列 17厘米嵌入式抽油煙機

抽油煙機選購指南產品介紹更多產品

Gaggenau VL414110 產品介紹

尺寸：高 173 mm X 闊 110 mm X 深 520 mm

保養期：1 年

爐灶面的高效通風系統
靈活的功率分配，僅在開放式通風元件處精確提取烹飪蒸汽
3毫米不銹鋼精密加工
For surface installation with a visible edge or for flush installation
可與 400 系列的其他 Vario 電器完美結合

手動打開通風元件。
關閉元件由不銹鋼製成，適用洗碗機。
帶油脂滴盤的金屬油脂過濾器，適用洗碗機。
Sensor-controlled operation of the extractor fan if at least one ventilation element VL 414 is open.

Planning notes:
If installing with the appliance cover VA 440 or adjustement strip VA 450 take into account the additional space required for the depth.
If combining several appliances with at least one appliance cover, the adjustment strip VA 450 is required to compensate for the depth of the appliance without the appliance cover.
If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
In the cut-out, the installation system requires the side edge to be at least 10 mm for surface installation and at least 13 mm for flush installation. Ensure a continuous cut surface of 90°.
The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
Additional instructions for flush installation:
Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
Maximum cooktop width between two VL: 60 cm.
If operated next to gas appliances, the air baffle AA 414 010 is recommended to ensure maximum performance of the cooktop.
If installed next to gas appliances, flat ducts must not be used for the piping up to the fan unit.
If installed next to VP 414, the flat duct must not be positioned underneath the VP 414.
Appliance can be snapped into the worktop from above. Additional fixing by clamps accessible from above, clamping range 30-50 mm.